| |
The REF500M drives your loudspeakers
with an unprecedented
level of sonic accuracy and power.
The REF500M delivers 121dB
dynamic range and 250 watts into
8 ohms, doubling to 500 watts into
4 ohms. The combination of fullyregulated
switch-mode power
supplies and analog control
circuitry brings incredible dynamic
expression to your music.
Bel Canto’s e.One switching amplification imparts many advantages including low noise, low heat and
low power consumption. It’s also the most direct way to convert electrical power into music. The entire
music signal is delivered to the loudspeaker efficiently without excess energy wasted as heat. The
compact, heavy gauge, all-steel chassis prevents micro-phonic noise from corrupting the audio signal
and brings music to life with extraordinary nuance and power.
The REF500M custom power input stage includes high speed, low noise rectifiers and large storage
and filter capacitors that substantially increase energy storage, significantly lowering noise while
reducing sensitivity to power line fluctuations. The custom input stage uses the latest advanced
amplifiers and passive components including: Caddock resistors, Solid Electrolytic ultra-low ESR
decoupling capacitors and low noise regulated power supplies. The combination of Bel Canto’s input
and power circuitry ensures the full dynamic expression in your music is experienced.
The Mono-Bloc design of a pair of REF500MM amplifiers allows great flexibility in placement, either near
your source components or your loudspeakers. The total isolation of each channel also results in the
holographic stereo imaging and separation. The elegant switching output stage eliminates thermal
distortion mechanisms caused by changes in operating temperature. You’ll experience breathtaking
truth in signal amplification that is life-like in its dynamic, detail and resolution.
Bel Canto music products are fine instruments that deliver music’s subtle detail, impact and beauty.
Green, low-heat, ultra-efficient heavily regulated switch-mode power supplies and switching output
stage make possible Bel Canto’s eco-friendly compact designs that are sleek enough to flatter any
room; place two Bel Canto e.One products in the space formerly occupied by a large, hot-running,
inefficient class-A design!
Specifications
| |
| Maximum Power Output: | | | | | | | 500W 4 ohms, 250W 8 ohms |
| Power Output 1% THD: | | | | | | | 450W 4 ohms, 225W 8 ohms |
| Minimum Load: | | | | | | | 3 ohms |
| Peak Output Current: | | | | | | | 35 amperes |
| Frequency Response: | | | | | | | +/-3 dB 1.5Hz-70KHz, all loads |
| THD+N: | | | | | | | 0.003% 1W, 1KHz, 4 ohms |
| IMD (CCIF): | | | | | | | 0.0003%, 1W, 14:15KHz, 4 ohms |
| Output noise: | | | | | | | 35uVRMS A-weighted 10Hz-20KHz |
| Voltage gain: | | | | | | | 27dB (single ended or balanced input) |
| Damping factor: | | | | | | | >1000 |
| Output Impedance at 100Hz: | | | | | | | <8 milliohms |
| Dynamic Range: | | | | | | | 121dB |
| Input Voltage for Max Output: | | | | | | | 2Vrms |
| Input connections: | | | | | | | Single-ended RCA or balanced XLR |
| RCA input impedance: | | | | | | | 100Kohms |
| Balanced input impedance: | | | | | | | 200Kohms |
| Output connections: | | | | | | | 1-set WBT 5-way binding posts |
| Power On usage: | | | | | | | 10W |
| Power Off usage: | | | | | | | 0.0W |
| Internally Set Operating Voltages: | | | | | | | 100-120VAC or 230-240VAC 50/60 Hz |
| Size: | | | | | | | 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm]
(WxHxD) |
| Weight: | | | | | | | 15 lbs, 7 Kg |
| |
|
Features and specifications are subject to improvements and changes without prior notice.
|
|